Diagnostics, Publications Accessories and Technical
Training
Telephone: 01278 428 699
We are delighted to announce the release of the new and improved TESLite Pro.
We have listened to what technicians and mechanics have told us, and as a result, we've revised the winning design of the original TESLite. Welcome the TESLite Pro.
We have listened to what technicians and mechanics have told us, and as a result, we've revised the winning design of the original TESLite. Welcome the TESLite Pro.
The internal load detection circuit has been enhanced to work in perfect
harmony with all automotive circuits, including CAN Bus and Flexray systems,
HGV - bus and truck.
The TESLite Pro also has a revised more comfortable grip.
In addition we have retained the Steady Tip pin design which stops the TESLite Pro from slipping off ECU and multiplug pins.
The TESLite Pro also has a revised more comfortable grip.
In addition we have retained the Steady Tip pin design which stops the TESLite Pro from slipping off ECU and multiplug pins.
Copyright 2012 Technical Topics Limited| All Rights Reserved.
The TESLite Pro is fitted with high quality 1.5 meter leads.
The TESLite Pro works with all multimeters and is THE fastest way to find difficult to diagnose automotive circuit faults. The TESLite Pro comes with instructions for use.
It's safe to use on ECU powers, grounds, sensor supply, sensor ground (signal wires must be isolated from the computer and component), actuators (supply and ground)
Setp 1: Remove your old multimeter leads and fit the TESLite Pro.
Step 2: Connect TESLite Pro to the problem circuit.
Setp 3: Press the button on the TESLite Pro . The meter will tell you if you have open circuit, short circuit, voltage drop, poor power or a bad earth.
Remember, TESLite Pro will test the quality of the supply. It will also verify that the ground side of the circuit has the capability to carry sufficient current for the component to operate.
TESLite Pro is the safest, quickest and most straightforward method of electrical circuit diagnosis - in the world!
Turbocharge your multimeter, by adding a TESLite Pro. Recently featured in Car Mechanics Magazine.
The TESLite Pro works with all multimeters and is THE fastest way to find difficult to diagnose automotive circuit faults. The TESLite Pro comes with instructions for use.
It's safe to use on ECU powers, grounds, sensor supply, sensor ground (signal wires must be isolated from the computer and component), actuators (supply and ground)
Setp 1: Remove your old multimeter leads and fit the TESLite Pro.
Step 2: Connect TESLite Pro to the problem circuit.
Setp 3: Press the button on the TESLite Pro . The meter will tell you if you have open circuit, short circuit, voltage drop, poor power or a bad earth.
Remember, TESLite Pro will test the quality of the supply. It will also verify that the ground side of the circuit has the capability to carry sufficient current for the component to operate.
TESLite Pro is the safest, quickest and most straightforward method of electrical circuit diagnosis - in the world!
Turbocharge your multimeter, by adding a TESLite Pro. Recently featured in Car Mechanics Magazine.
Just £60 plus VAT, Postage and Packing (£76 inclusive).