Telephone: 01278 428 699
Please scroll down the page to see our products. The products and prices listed here are for UK dispatch only and include VAT and Postage.
We request that Overseas customers call or email for an inclusive shipping price.
Technical Topics are a
document based automotive
workshop information source
designed and written with the
sole objective of helping you
to fix cars.
There are 12 issues in each set. There are four sets available.
There are 12 issues in each set. There are four sets available.
Buy Set 2 Bulletins.
Buy Set 3 Bulletins.
Buy Set 4 Bulletins.
Buy Set 5 Bulletins.
This full size A4 book takes the reader
through using an oscilloscope for
automotive diagnostics. Oscilloscope
Diagnostics takes the reader through
getting to grips with this powerful
method of diagnostic testing.
Measuring Amps as well as Volts
during a diagnostic routine will enable
you to make quick accurate diagnostic
decisions by testing and not guessing!
CAN you answer the following questions?
1) How do you identify a CAN enabled vehicle?
2) What fault would be indicated by a resistance of 0.6 O between CAN High and Can Low, and what symptom would be evident?
3) What voltage difference should you expect to see if the CAN is OK?
4) What should you do differently to accurately diagnose CAN vehicles?
5) How should the multi meter or oscilloscope be setup to diagnose the High Speed CAN?
6) Why do CAN vehicles have several different networks?
7) What is a CAN Gateway and how do you test it?
All these questions and more are answered in our latest publication. Full of 'need to know' information including case studies, test data, a trouble shooter flow chart and sample waveforms.
1) How do you identify a CAN enabled vehicle?
2) What fault would be indicated by a resistance of 0.6 O between CAN High and Can Low, and what symptom would be evident?
3) What voltage difference should you expect to see if the CAN is OK?
4) What should you do differently to accurately diagnose CAN vehicles?
5) How should the multi meter or oscilloscope be setup to diagnose the High Speed CAN?
6) Why do CAN vehicles have several different networks?
7) What is a CAN Gateway and how do you test it?
All these questions and more are answered in our latest publication. Full of 'need to know' information including case studies, test data, a trouble shooter flow chart and sample waveforms.
In failing electronic circuits, measuring Volts alone will give you only
half the picture. Use your oscilloscope, voltage probe and low amps
clamp to get the FULL picture.
The book has been written by a Diagnostic Expert who has been involved in diagnostics since the electronic revolution in the 80's.
It deals with real problems and real vehicles using straightforward language. The book contains sample waveforms with detailed descriptions as well as illustrations and diagrams.
The book has been written by a Diagnostic Expert who has been involved in diagnostics since the electronic revolution in the 80's.
It deals with real problems and real vehicles using straightforward language. The book contains sample waveforms with detailed descriptions as well as illustrations and diagrams.
CAN Bus has been fitted to production
vehicles since the late 1990. It has been
fitted to most vehicles sine 2004.
If you are facing electrical faults on modern vehicles, this book will help you understand what and where to measure.
If you are facing electrical faults on modern vehicles, this book will help you understand what and where to measure.
Buy Oscilloscope Book £32.75
Buy CAN Bus Book £20
CAN Test Box allows you to check
out the network at the 16 pin
EOBD Data Link Connector. Use a
meter or a scope to see what's
going on.
This item is very useful in checking to see it you have the baisc ingredients for scan tool communications, such as power, ground and communication activity. A real time saver.
You can also use this device to extend your scan tool connection lead, useful if your equipment is based on a roll cart or trolley.
This item is very useful in checking to see it you have the baisc ingredients for scan tool communications, such as power, ground and communication activity. A real time saver.
You can also use this device to extend your scan tool connection lead, useful if your equipment is based on a roll cart or trolley.
Break Out Leads are where
access to the component is
difficult. Simply disconect the
component and fit the Universal
Break Out Lead.
These are available in four different sizes to suit the different pin
and plug combinations. Each size is colour coded for easy
identification.
Each Breakout Lead has a 4mm connector where you can attach
your multimeter or oscilloscope.
The Breakout Lead is also ideal when you want to use a sensor simulator. You can leave the component Ground and Supply connected whilst you simulate the signal voltage.
The Breakout Lead is also ideal when you want to use a sensor simulator. You can leave the component Ground and Supply connected whilst you simulate the signal voltage.
Buy Mini 1.2mm
Buy Micro 0.6mm
Buy Mini 1.2mm
Buy Micro 0.6mm
£63.45
£63.45
£63.45
£63.45
Buy Full Set
£212 incl VAT and Del
Save £££'s
Scope Back Probes are ideal for
measuring voltages in a way that
doesn't damage the wire. Simply
push the probe into the connector
multiplug, simple!
£40 inc vat and delivery
£40 inc vat and delivery
Copyright 2011 Technical Topics Limited| All Rights Reserved.
£72.99
£72.99
£72.99
£80.00
Tool Cart Diagnostic Boom
Designed to fit most square legged Tool Carts, the
Diagnostic Boom makes managing the diagnostic
machines test leads really straightforward.
The boom has a 360 degree swivel action. It has two hangers attached to the main boom to allow test leads to be stowed safely.
Once fitted, the boom has an effective height of approximately 1.8 meters from the ground. It has a 1 meter reach.
The boom can be bolted to any of the legs of the tool cart (note: you will need to drill two small holes in the carts leg for the two fixing bolts).
The Diagnostic Boom enables the leads to be stored safely when not in use, and kept off the ground when in use.
The boom has been designed to support the weight of the test leads and the Pico Scope. It can also be used with Snapon Modis, Vantage Pro and Bosch range to support the test leads.
The boom has a 360 degree swivel action. It has two hangers attached to the main boom to allow test leads to be stowed safely.
Once fitted, the boom has an effective height of approximately 1.8 meters from the ground. It has a 1 meter reach.
The boom can be bolted to any of the legs of the tool cart (note: you will need to drill two small holes in the carts leg for the two fixing bolts).
The Diagnostic Boom enables the leads to be stored safely when not in use, and kept off the ground when in use.
The boom has been designed to support the weight of the test leads and the Pico Scope. It can also be used with Snapon Modis, Vantage Pro and Bosch range to support the test leads.
The Diagnostic Boom is
constructed of steel and
finished in silver/grey.
The boom costs just £100 plus VAT and Shipping (£140 total). UK shipping only. Please call for a price for other destinations.
Click below to order yours. Delivery will take approximately 5 working days.
The boom costs just £100 plus VAT and Shipping (£140 total). UK shipping only. Please call for a price for other destinations.
Click below to order yours. Delivery will take approximately 5 working days.
Auto Electrician Workshop, Diagnostics, Publications
Technical Training and Accessories
TESLite Pro allows you to quickly and accurately check
automotive circuits quickly and accurately. Works with your
multimeter, just replace your existing leads with the TESLite
Pro.
Don't guess test - use the TESLite Pro.
This product comes with full instructions. Click the image to go to the TESLite Pro page. £76 incl vat and del.
Don't guess test - use the TESLite Pro.
This product comes with full instructions. Click the image to go to the TESLite Pro page. £76 incl vat and del.
Only £85 + vat and del
The PICO oscilloscope test leads have been designed to make you life easier. These
leads allow you to easily see which component the scope is connected to whilst you are
testing. The extended lenght makes both road test and workshop testing really easy.
The leads are attached to the PICO scope by a unique design of BNC Bconnector which means that you can connect and disconnect one handed.
The leads are built using high quality color coded cable which is manufactured specifically for high speed scope testing. The signal quality of these leads is second to none.
At the vehicle end, the leads are fitted with stackble 4 mm industry standard piggy back connectors. You can stack back multiple ground leads to one ground point, and use voltage probes, current clamps etc.
The leads are attached to the PICO scope by a unique design of BNC Bconnector which means that you can connect and disconnect one handed.
The leads are built using high quality color coded cable which is manufactured specifically for high speed scope testing. The signal quality of these leads is second to none.
At the vehicle end, the leads are fitted with stackble 4 mm industry standard piggy back connectors. You can stack back multiple ground leads to one ground point, and use voltage probes, current clamps etc.
£180 inc vat and del